smallbutfine
Well-known member
Hello,
we had a psu fault recently.
Since our original manuals do NOT have the detailed schematics of the board it's not possible to read the value of the resistor that is placed between the right bridge rectifier and the big cap on his right side. Everything else will easily be exchanged (bridge rectifiers will be upgraded)...
Can an owner of a Max or Project Topaz in working condition help us out?
(It's just to use a screwdriver for 5 minutes or take a look if you have the schematics...nothing has to be disassembled really..)
Any help on this would greatly be appreciated! :thumb: :guinness:
Kind regards
Martin
PS: The silkscreen on the pcb says "OEM1 PSU PCB P13003/05 ISS. A".
we had a psu fault recently.
Since our original manuals do NOT have the detailed schematics of the board it's not possible to read the value of the resistor that is placed between the right bridge rectifier and the big cap on his right side. Everything else will easily be exchanged (bridge rectifiers will be upgraded)...
Can an owner of a Max or Project Topaz in working condition help us out?
(It's just to use a screwdriver for 5 minutes or take a look if you have the schematics...nothing has to be disassembled really..)
Any help on this would greatly be appreciated! :thumb: :guinness:
Kind regards
Martin
PS: The silkscreen on the pcb says "OEM1 PSU PCB P13003/05 ISS. A".