Family Hoof

Front Panel Designer - How to make custom thru holes?
« on: June 18, 2005, 06:33:23 PM »
Okay, so I understand HPGL and can make custom engravings, but what I really want to do is have some custom thru holes. Nothing fancy, just shapes that aren't circle, rectangle, or D. I tried using those three to make something new but it didn't work out well.

So, I'm assuming I need to create some macro elements. I notice the file extension is .fdm. What does fdm stand for and what software might I need to create/edit them?

Thanks in advance!


nrgrecording

Front Panel Designer - How to make custom thru holes?
« Reply #1 on: June 19, 2005, 08:05:33 AM »
Hi.

With frontpanelexpress you can make
-drilled holes
-rectangular hole
-D hole
-cavitiy
-and new in V3.3: curved slot

As far as i know HPGL is only 2D (2 dimensional) which means you can place objects in the length and width NOT in the depth.  So every drillings have to be done in frontpanelexpress.
If you want to make special holes which you can't do with the standard tools - that is a problem  :?  It is possible but schaeffer has to do special work which will cost much (around 80? i think)  :evil:
I'd been told that a new feature will be implemented in the next version of frontpaneldesigner.
Macroelements are only informations about how standard drills or elemts are placed on the frontpanel. For expample... if you need an xlr hole with one hole in the middle and the 2 drillings for the screws... this can be macro element.

Try to use the standard objects. Maybe it is possible to make the cutout with different kinds of tools when they're superpose.

Or make HPGL files to use them as a border/frame and rasp the holes yourself.

Frank.
Frank Röllen. www.energyrecording.de [FORUM · DIY WEBSITE · STUDIO]°°°° www.frontpanels.de [Engraved Frontpanels]°°°°

Family Hoof

Front Panel Designer - How to make custom thru holes?
« Reply #2 on: June 19, 2005, 09:33:52 AM »
Understood, thanks Frank! :guinness:

TomWaterman

Front Panel Designer - How to make custom thru holes?
« Reply #3 on: June 19, 2005, 02:18:36 PM »
You can do parallelograms and triangles with the new v3.....the angle parameters in the rectangle.

-Tom


 

Related Topics

  Subject / Started by Replies Last post
11 Replies
4690 Views
Last post March 11, 2007, 01:56:46 PM
by Sender
38 Replies
5753 Views
Last post September 22, 2008, 09:15:49 AM
by lagoausente
10 Replies
2874 Views
Last post February 14, 2011, 02:06:54 AM
by Ptownkid
2 Replies
1991 Views
Last post February 07, 2012, 08:17:28 AM
by leadbreath