revlog action

Hey,

Just got my 22k revlog pots from evalue but am lil stumped...

Shouldnt i measure (with a dmm) 22k on the 1st 2 pins with the pot turned fully to the left and this should go down to 0k as the pot is turned to the right? that'd be a reverse action then right...or am i gettin mixed up with taper and curve?

I've had a few mixed up orders with these guys before so I'm wondering if they've sent normal ones instead of the rev's...

Ta

it's the curve that's reversed - not the pot action. of mechanical reasons, pins needs to be where they are :razz:

curve and action thats the one! cool, thanks jakob :thumb: