OEP screening cans

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dufo

Well-known member
Joined
Jan 18, 2005
Messages
174
Location
Melbourne, Australia
I just got my OEP's and cans. I cant see how the plate that goes on the bottom of the trafo can be positioned so that there is some lip for the can to be soldered to. Can it just sit over the top of the trafo without soldering it to the plate ?? thanks alot..
 
The lid is ment to be pushed in untill it is in level with the can edge. Then solder. Remember to peel off the label off the transformer and stick it to the can, so you can read the transformer type later.

Jakob E.
 

Latest posts

Back
Top