[Val_r]

Wanted to know how it works the attack time setting of the UA 175A, and what I should mod to get slower attack times.

Thanks,
Val

[PRR]

> how it works the attack time setting of the UA 175A

schematic

Output signal is rectified in the 6AL5. The 0.1uFd capacitor is charged to a negative voltage, enough to reduce the gain of the 6BC8.

The 25K Attack pot slows the charging of the 0.1uFd cap.

> what I should mod to get slower attack times.

Change the Attack pot to 100K or 250K.

Or if you also want longer Release, chnage the 0.1uFd cap to 0.3 or 0.5uFd.

3630 release and attack time modification

Started by gnd The Lab

Vari Mu Compressor attack & release times ???

Started by gary o The Lab

Adjusting the attack time on mnats G1176???

Started by casrec The Lab

Confusion about Vari Mu published attack times

Started by tardishead Drawing Board