wiring my zeta 3 to my ampex reel to reel

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

thinktank2

Active member
Joined
Apr 26, 2005
Messages
33
I just picked up a zeta 3 sync and need help to wire it or connect to my mm1100 2" 16 track. Anyone done this or know how this is done? There a quite a few options coming of the back of the zeta, but not sure how it would interconnect with my reel to reel. I'm basically trying to sync it with my pro tools gear. Thanks.
 
umm I know this isnt what you want to hear..

but you really need the doc's to the zeta three so you can see what the pinout needs to be...
 
Right, but don't have them. Didn't come with the unit. I've been hunting around on the web, but no luck yet. I'll keep looking. Thanks.
 
Zeta 3 Master Transport pin assignments

Pins 1 and 2 are tied together
Pin 3 - Stop
Pin 4 - Fast Foward
Pin 5 - Rewind
Pin 6 - Play
Pin 7 - GP1/Pause/Lifter Defeat
Pin 8 - GP2/Mute
Pin 9 - GP3/Rehearse
Pin 10 - Record
Pin 11 - Record Tally
Pin 12 - Direction
Pin 13 - Tach
Pin 14 - GND Sence
Pin 15 - unused
Pin 16 - unused
Pin 17 - +5V DC
Pin 18 - unused
Pin 19 - Command Common
Pin 20 - GP1 Common
Pin 21 - GP2 Common
Pin 22 - GP3 Common
Pin 23 - Spare Tally
Pin 24 - unused
Pin 25 - Gnd

Hope that helps
ruairi
 

Latest posts

Back
Top