Make a bar from tiny cubes (magnets!)

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Kat

Active member
Joined
Jun 7, 2004
Messages
25
Location
Madrid, Spain
Hi,

I'm wondering if it's possible to join tiny neodymium magnet cubes (1/8" per side) to form a bar of about 1.5" x 1/8" x 1/8" with the poles in two of the large sides. Consideratins ? Is it a good idea or a foolish one ?

Thanks in advance.
 
> join tiny neodymium magnet cubes (1/8" per side) to form a bar of about 1.5" x 1/8" x 1/8" with the poles in two of the large sides.

For a ribbon mike, right?

The magnets will repel each other. You need very strong glue.
 
Back
Top