NovaPA
Well-known member
Yes, yes, this is yet another one of my unfinished projects. I was planning to build a tube preamp, so I had already installed the power supply, switches, and two jack connectors in the aluminum case...
However, this project is not meant to be completed.
So, here’s what we have:
However, this project is not meant to be completed.
So, here’s what we have:
- 1U aluminum case
- Inside: a toroidal transformer and a stabilizer board with outputs – 6.3V AC at 1A and 250V DC at 0.05A (stabilized).
- Front panel: 2 connectors and 1 switch.
- Rear panel: a 220V power socket and a switch.
- I'm asking €35 for "as is" + shipping from Lithuania.
Last edited:
