3D printed transformer brackets

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dogears

Well-known member
Joined
Nov 15, 2017
Messages
548
Location
Texas
We used these in a project recently and got a lot of requests about them, so we figured to share.

https://www.ironageaudioworks.com/3d-printed-brackets
 
dogears said:
We used these in a project recently and got a lot of requests about them, so we figured to share.

https://www.ironageaudioworks.com/3d-printed-brackets

Nice,
thank you so much.

I will use that, maybe I just separate the 2 transformers as the way you done it they are so close together that the crosstalk might be high
 
Thank you so much!  I have four A-67 with the wires chopped short, so I am cutting off the threaded mount to be able to solder to them.  Now I have a way to mount them...once I figure out my 3D printer which is still in the box  ::)
 

Latest posts

Back
Top