Helsing
Well-known member
I am building supply for power one to two API 312 mic pres. I have an 18-0-18 amveco toroid. I am using 317s for +/-18v. This works fine.
My question is regarding phantom power. I am using a Cockcroft-Walton doubler circuit which arrives at a rectifed voltage of around 54 volts. Is this on the low side for using a 317HV for 48v? I want to account for slight mains flucuations in the design.
Would I be better off jumping up to the 22v secondary toroidal?
Helsing
My question is regarding phantom power. I am using a Cockcroft-Walton doubler circuit which arrives at a rectifed voltage of around 54 volts. Is this on the low side for using a 317HV for 48v? I want to account for slight mains flucuations in the design.
Would I be better off jumping up to the 22v secondary toroidal?
Helsing