Reply to thread

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Wouldn't R10 (220 ohm) between C8 and C9 form a CRC stage for the output primary B+?


If so, wouldn't that kind of be a requirement for a low-hum single ended output stage, due to the (relative...I keed) lack of common mode rejection inherent in a single ended vs push pull circuit design?  But what do I know.


Edit:  [USER=40097]@rock soderstrom[/USER]  if this is a screamer, that newly unused 1M pot (and maybe the unused caps) might be able to be repurposed into a bass cut control.  I've found it handy in situations like using a Les Paul in the neck position, for higher gain work.  Edit again:  I mean without messing with the gain.  :)


Back
Top