500 Series Rack Idea.. working on a peter purpose 525

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
[quote author="RogerFoote"]codered

The connector is centered between the mounting holes. API500 stuff is centered. You can also use this connector to build dbx900 modules by chopping off the "wings" on the ends and punching holes to match that spec. dbx900 stuff is offset from center.

Pics soon!

Roger[/quote]

Roger,
I think I wasnt clear about the offset.The offset you're talking about is heightwise (in the Z direction) but I was curious to know the offset between the mounting centerline and the the card centerline(in Front View).The DBX and the 500 series seem the same.
 
Working on a new peter purpose 525.

FPE order:

525_FPE.jpg


(I measured peter's carrier and front panel about a million times
before I ordered.)

Sourced some different switches other than the ones peter used as getting a Rapid
order in the US is quite hard.

525_switches.jpg


Its now underway......

new_525_front.jpg


new_525_top.jpg


I'll post a finished picture when I'm done.

GARY
 
Back
Top