gnarmageddon
Active member
Long time listener, first time caller.
Hopefully someone who's built one lately can help me out on a couple parts here.
1st - 1A Bridge / Rectifier in the B1 position. Can't seem to find a matching part from the BOM - would this http://www.newark.com/nte-electronics/nte5332/bridge-rectifier-single-phase/dp/06M7451?ost=06M7451&ad=81515566701&selectedCategoryId=&CMP=KNC-GUSA-GEN-SHOPPING-NEW-NTE-ELECTRONICS&gclid=CJmx0NvWzckCFVCAaQodEBoDZQ work?
2nd - Pushbuttons over toggle switches for pad/phantom/hpf/phase. I'd love to use buttons but am (admittedly) lost on what I should be looking for here as a suitable replacement.
3rd - Last one, promise. I want to use different color LED's for the metering. For example, the Mouser part number in green rates If - Forward Current at 20mA. If I wanted to use white and blue LED's but had a slightly different forward current (let's say 25mA), would I need to be swapping resistors on the meter pcb?
Thanking anyone in advance who can get me pointed in the right direction. Boards are on the way from PCBG and most of the parts are already here. I've done some basic builds (DIYRE CP5, Hairball Copper) but this is definitely wading into deeper water for me. (And trust me, I waded through the 25 page thread trying to find these answers first)
Hopefully someone who's built one lately can help me out on a couple parts here.
1st - 1A Bridge / Rectifier in the B1 position. Can't seem to find a matching part from the BOM - would this http://www.newark.com/nte-electronics/nte5332/bridge-rectifier-single-phase/dp/06M7451?ost=06M7451&ad=81515566701&selectedCategoryId=&CMP=KNC-GUSA-GEN-SHOPPING-NEW-NTE-ELECTRONICS&gclid=CJmx0NvWzckCFVCAaQodEBoDZQ work?
2nd - Pushbuttons over toggle switches for pad/phantom/hpf/phase. I'd love to use buttons but am (admittedly) lost on what I should be looking for here as a suitable replacement.
3rd - Last one, promise. I want to use different color LED's for the metering. For example, the Mouser part number in green rates If - Forward Current at 20mA. If I wanted to use white and blue LED's but had a slightly different forward current (let's say 25mA), would I need to be swapping resistors on the meter pcb?
Thanking anyone in advance who can get me pointed in the right direction. Boards are on the way from PCBG and most of the parts are already here. I've done some basic builds (DIYRE CP5, Hairball Copper) but this is definitely wading into deeper water for me. (And trust me, I waded through the 25 page thread trying to find these answers first)