Reply to thread

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

There are many many threads about ribbon microphones here, and I think most people would agree that ribbon mics are great, but there’s less to discuss from a DIY perspective because there are (usually) no electronics. Plus, while condenser capsules are available for purchase in many styles, ribbon motors are not. There are those here who cut, corrugate, and install ribbons, but because that’s more difficult than soldering, it’s not as common.


I started a similar thread recently about (moving coil) dynamic mics. The reality is that ‘classic’ condensers are just easier to DIY.


Back
Top