AC Sound Pi-3141 Pre-Order (PYE Comp) 2nd Round!! PREORDER OPEN!

[kml23956]

The case is on order.  8)

 

[stevenclements]

Have my case...
only one of the PCB's (yeah I'm a goof) the other is on order.

THANK YOU for the Mouser cart... ready to order now.

Anyone have a link to the knobs?

 

[stevenclements]

Have my case...
only one of the PCB's (yeah I'm a goof) the other is on order.

THANK YOU for the Mouser cart... ready to order now.

Anyone have a link to the knobs?

Are these the ones?
http://ca.mouser.com/Search/m_ProductDetail.aspx?Davies-Molding/1500AU-BLACK-LINED/&qs=sGAEpiMZZMuiwDVLTMm01ajIGS4kAMb6V0%252bTv0RgI2A=

 

[abechap024]

Have my case...
only one of the PCB's (yeah I'm a goof) the other is on order.

THANK YOU for the Mouser cart... ready to order now.

Anyone have a link to the knobs?

Are these the ones?
http://ca.mouser.com/Search/m_ProductDetail.aspx?Davies-Molding/1500AU-BLACK-LINED/&qs=sGAEpiMZZMuiwDVLTMm01ajIGS4kAMb6V0%252bTv0RgI2A=

Allied Electornics doesn't have an order history (drives me nuts) Here are the small ones:

https://www.alliedelec.com/search/productdetail.aspx?SKU=70097809

I always have to double check the big ones cause they have so many different sizes.

 

[stevenclements]

Aaron Marci found these on Mouser
Smaller Knobs - http://ca.mouser.com/ProductDetail/Davies-Molding/1510AH/?qs=/ha2pyFadujrUgPg1/sA6O7cgb4nyXIT0wlO%2bgfqsYQ=
Larger Knobs - http://ca.mouser.com/Search/ProductDetail.aspx?Davies-Molding%2f1500AU-BLACK-LINED%2f&qs=sGAEpiMZZMuiwDVLTMm01ajIGS4kAMb6V0%2bTv0RgI2A%3d

I copied the previous cart and updated it to include enough knobs for a stereo unit

the cart is here - https://ca.mouser.com/ProjectManager/ProjectDetail.aspx?State=EDIT&ProjectGUID=21765FC6-F15D-4DA2-B601-0CF69821FEC6

Abe... can you suggest a power transformer on Mouser?  I'd like to add that to the cart as well then I think pull the trigger and order

 

[Patrick from Davis]

Someone can check if this is correct, but I think you need this one and some other tidbits if you are using one of Dan's cases.

Mouser P/N's:

553-F117X Power Transformer 
693-6200.2100 IEC + Fuse drawer
568-NC3FD-L-1-B Female XLR Connector (2X)
568-NC3MD-L-1-B Male XLR Connector (2X)

Patrick

 

[Grummy77]

So how do we check this?

Someone can check if this is correct, but I think you need this one and some other tidbits if you are using one of Dan's cases.

Mouser P/N's:

553-F117X Power Transformer 
693-6200.2100 IEC + Fuse drawer
568-NC3FD-L-1-B Female XLR Connector (2X)
568-NC3MD-L-1-B Male XLR Connector (2X)

Patrick

 

[Patrick from Davis]

The power transformer is the only one I have a question about.  But as far as I can tell it should work.  Abe might want to check it out to see if he see's anything odd.
Patrick

 

[stevenclements]

...we should probably move this conversation to the build thread...
http://groupdiy.com/index.php?topic=43351.240

 

[midnitestudios]

Is there a build manual for the pye compressor?
thanks!

 

[shabtek]

when will round 1 preorder be shipped?

 

[Grummy77]

when will round 1 preorder be shipped?

I believe round 1 circuit boards have already been shipped. I recieved mine already up in Canada & I know at least one other guy up here who has also recieved one. Maybe try sending Abe an email or PM.

 

[usekgb]

Mine took a while to get to me, and I'm only about 30 miles away from Abe.

 

[naths101]

I hope this preorder is still open as I ordered 4 boards from the website over the weekend...!