Altec 9014a Acousta Voice Schematics

[opacheco]

Hi

I had searched the Altec 9014a Acousta Voice Schematics but found nothing about; Do someone have a copy of them?

Thanks
opacheco

 

[emrr]

They are standard T filters. Drawing on the cans. There is no published parts list I’ve ever seen, you can open them and write down the values easily enough.

 

[opacheco]

They are standard T filters. Drawing on the cans. There is no published parts list I’ve ever seen, you can open them and write down the values easily enough.

emrr thanks for comment!!!
That’s good idea but I don’t have any filters of them !!.

I refuse to believe that nobody has a schematic.

Thanks again!!!
opacheco

 

[emrr]

Well then just do the math and design the filters. They're very basic 600 ohm bridged 'T' filters. You'll finish that before you find any official documents. I have the whole telephone book sized manual binder on those filter systems, and schematics aren't part of it.

 

[Whoops]

I refuse to believe that nobody has a schematic.

Better to accept Doug advice than to refuse the reality

 

[opacheco]

Better to accept Doug advice than to refuse the reality

Sorry but I don’t have option because I don’t have any unit like this in order to copy them!

opacheco

 

[opacheco]

Well then just do the math and design the filters. They're very basic 600 ohm bridged 'T' filters. You'll finish that before you find any official documents. I have the whole telephone book sized manual binder on those filter systems, and schematics aren't part of it.

emrr,
Could I get a copy of that book?
Thanks anticipated

 

[emrr]

emrr,
Could I get a copy of that book?
Thanks anticipated

Uh, no. I'm not spending time copying a 100+ page binder.

 

[opacheco]

Dear emrr I can pay for this copy or scans work!!

opacheco