Reply to thread

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I just found my old note book from 2006. I tested 32 NOS 6AU6. I measured cathode and plate volts with them strapped as a triode, One with screen grid, suppressor and plate strapped and then with the screen grid as the plate and the other two grounded. I also measured gm, rp and mu. I separately measured the noise. This must have been before I got the Ferrograph because I was estimating rms noise voltages from the peak to peak value of the waveform seen on a scope..


Cheers


Ian


Back
Top