Ampex ATR100 Multipoint search to cue remote (looking for documentation).

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Silvas

Well-known member
Joined
Aug 15, 2006
Messages
727
Location
Chia, Colombia
Guys, hi!

I've just unearthed this beauty from my former workplace. With cable and all!

Before plugging it in on my newly restored 1/2" ATR104, I want to double-check for any firecrackers (tantalum caps) on the power rails and such...And replace if needed. Can't seem to find anything anywhere RE manual/schematics/documentation so I thought I'd ask here. So I come looking for your wisdom! Anyone has a manual & schemo around so I can start working on it?

Thanks a lot!


1629664251412.png
 
Update: Replaced a couple of firecrackers (tantalum caps) from the 5V rails as a precaution, then fired it up. It's not working properly, it locks out the display on the main unit (shows 88:88:88) and i get runaway capstan. Still haven't found any new info or schemos....
 

Latest posts

Back
Top