Hi everyone!
This is my first DIY...All thanks to Jacob...
Ck12 Peluso capsule
DIY microphone body with little help from my friend
Three brass mesh soldered together,and soldered with hysol on DIY body
Beyer trannie 1:10,amazing sound trannie very happy with it....
Wimma block caps,Panasonic electrolytic,LCR styroflex caps...
Thomann 7pin-xlr cable...
PCB made here in Zagreb(Croatia)....
Was compare with AKG Solidtube and Neumann tlm149, G7 is much much better mic than Solidtube in all way,in compare with
Neumann, G7 is much better in mid range and bottom to me,Neumann has more open high but not so much...
But i think that G7 with better capsule can be amazing, think that capsule is most important thing in this mic...
Just my opinion...
Thanks to Jacob Again...
