anybody seen something like this?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mkiijam

Well-known member
Joined
Aug 25, 2017
Messages
171
I'm looking for a threaded cylinder like in the picture. many different sizes would work, but something around 1/2 inch in diameter and height.threaded_deal.jpg
 

Yes, I have some of those that I brought from Ikea for free.
They have near the Help Desk a place with different hardware parts that you can take as spares.
I actually took some random parts I might need and took some of those

4989858846_64864ecdfd.jpg


100514.png


i3Wzm.jpg
 
I've been looking for something similar. A hex standoff 3/8" long, female threaded 6-32 both ends and threaded in the side (M2.5-0.45). Any ideas where someone could get these?
PXL_20220114_062737323.jpg
 
mcmaster carrv has a pretty exhaustive inventory of all things machined. i didn't see those in a cursory look - their catalog system is a labrinth on phone - but their resource desk is helpful and would know right away. www.mcmaster.com
 
Hex standoffs work nicely under low tension.
Below pict are M3's tapped 4-40.

8RLeXpy.jpg
 
Last edited:

Latest posts

Back
Top