I have an Avid Omni. Anyone have a schematic or info on this unit. Main I/0 works but the Line in is all that works on ch 1 and ch 2. These have a preamp for 2 mics or 2 instrument inputs. It has to be an electronic switch inside that selects mic input or DI or Line. I can hear signal in the back ground when using the microphone or DI but its low and like crosstalk and never gets to the input so a switching chip of some kind is blown.
I've reset the unit and also installed current firmware and they still don't work. Any info you have would be helpful. I understand Avid does not release schematics but maybe someone has info .
Thanks, Michael
I've reset the unit and also installed current firmware and they still don't work. Any info you have would be helpful. I understand Avid does not release schematics but maybe someone has info .
Thanks, Michael