BA182 c&d Schematic - Why is it shown twice?

[wells2p]

Why is the circuit shown twice on the BA182 schematic?
The BOM only specifies one set of each component.
As always I apologize if this has been discussed before...couldn't find anything on the topic

 

[radardoug]

If you look closely the drawings are slightly different to show the difference between the c and d versions.

 

[wells2p]

Ah pin J - thank you!

 

[wells2p]

If you look closely the drawings are slightly different to show the difference between the c and d versions.

If you look closely the drawings are slightly different to show the difference between the c and d versions.

Well after searching today I cannot find where pin J goes for 182/D

 

[Khron]

"Pin J" just looks to me like it connects the shielding can that's covering (?) the eq components, to the middle tap of the inductor.