Reply to thread

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I think I said I was surprised it worked without the center tap pots. I am no circuit designer and i never tried it without center tapped pots.  To get the sections going i used two 5K resistors with a lead to ground to simulate the center tapped pot on the schematic. Then with another lead I could either get maximum or minimum gain. That works in the absence of a center tapped pot and without committing to a rotary switch. That was the context in which I made the commment.


Back
Top