Bass Cut G7 Microphone and Schematic Gates Radio Company

[thom]

It's possible to make on the power supplier a bass cut at 160 Mz for the diy G9 microphone.

And a looking for a gates radios company model 6631 schematic, it's a FM Limiting amplifier.

Thanks :roll:

 

[rafafredd]

???

Do you want to make the low cut of the G9 preamp 160Hz? Is this what you want? You can do it by simply changing the low cut cap for a lower value one...

 

[thom]

Yes i want have a low cut in my supplie box diy G9 microphone.
But i do thinking about this and i have no ideas how i cant make it.
i looking for a schematic.

 

[MikoKensington]

thom I think you mean G7.

 

[thom]

Sorry, it's the G7 microphone !!!

 

[rafafredd]

I really think it would be better to put a low-cut switch at the microphone, where the signal is in high-impedance, and constant impedance. A low cut after the microphone output transformer would vary with the load when you use the mic with diferent preamps...