Beag PKC-901 master bus noise improvements?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
12AX7 said:
I think I have some Lundahl 1:1s but I'm not sure if they would fit in there. I'll have to check though.

So now I have four options for the output stage:
1) Keep the original as it is and see how well it performs after the rest of the summing bus modifications
2) Use the impedance balanced circuit (very easy mod and a pretty cool idea)
3) Use a 1:1 transformer (easy mod but would have to find two that fit on the module)
4) Use a THAT 1646 based output stage (not the easiest but should be doable)
Considering economics and performance vs. cost, I would readily opt for the 2nd option.
 

Latest posts

Back
Top