Budget Arb Gen gets 3rd party software

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tubetec

Well-known member
Joined
Nov 18, 2015
Messages
5,951
https://www.eevblog.com/forum/testgear/feeltech-fy6600-60mhz-2-ch-vco-function-arbitrary-waveform-signal-generator/2025/

Over there a  programmer has created a custom front panel UI for the Feeltech unit ,
The new code is  flashed to the display/control board memory with an St-link programmer ,                                                                                                                               
The pc based program is connected via usb  and gives remote control of all functions on the front panel  plus adds a cal page  and allows compatible arb wave file upload .

I got stuck in and flashed one of my two units over to help pick up some of the bugs .
 

Attachments

  • PC Software_Control.PNG
    PC Software_Control.PNG
    91.7 KB · Views: 14

Latest posts

Back
Top