Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
I’ve usually used 90 duro and if you modify the infill and structure you can dial in the “bounce” you want- but yes being able to print in a softer duro from the start makes life a lot easier! I haven’t tried yet only because the settings in the slicer need a lot of fine tuning to get good results, but i’d like to be able to work with 70-75.
I’ve usually used 90 duro and if you modify the infill and structure you can dial in the “bounce” you want- but yes being able to print in a softer duro from the start makes life a lot easier!
I haven’t tried yet only because the settings in the slicer need a lot of fine tuning to get good results, but i’d like to be able to work with 70-75.
