Calrec Parts List - mouser or digikey?

[thedug]

Just curious if anybody has a mouser or digikey parts numbers for the calrec project?

d./

 

[thedug]

I was just looking at the parts list and can anyone tell me what a 3pin led is?

 

[thedug]

I noticed that the tantalum caps are 16V. If I run the eq at 18V will I need to get bigger caps?

Also, anybody know of some cheap tantalums? The cheapest I found at mouser are $1.5 and at 48 of them that adds up!

d./

 

[thedug]

yup!

 

[thedug]

Well considering that I bit the bullet and ordered my parts.

I"ll just forgo that. =P


d./

 

[thedug]

I'll go check it out, but why are you doh'n what did I miss?

 

[thedug]

That was an intersting thread. Seems to reinforce my thoughts to replace tantalums with tantalums.

Althought I did job down the names of those caps.

 

[cwatkins]

so will 10v work if you use the 18v or 15v power source option,
or do you need the 16v, they are still 1.5$, it adds up quick.

 

[Guest]

the 3 pin LEDs are bi colour LEDs
If I remember rightly it is green for on, red for bypass....