• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Classic Solo V2 PCB built and working

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ruffrecords

Well-known member
Joined
Nov 10, 2006
Messages
16,155
Location
Norfolk - UK
I have a Classic Solo V2 board surplus to requirements. This is the one I did all the hum tests on. It has a couple of cut tracks that I have now replaced with wire links. Completely built, no components missed out. All you need is a couple of 6922 tubes, enclosure, mains and output transformer and some XLRs and you are ready to go. Includes the  Sowter  1948C  custom mic transformer they make for me , complete working phantom and HT supplies and PCB connectors. Currently wired for 6.3VAC heater but links can be changed for 12VAC operation.

£100 shipped anywhere.

Cheers

Ian
 
Back
Top