Collective Cases - PSU cases, ez1073, CLX cases and PCB's.

[dandeurloo]

PLEASE CONTACT ME THROUGH EMAIL FOR PURCHASING, NOT PM'S! 
If you don't see a project you are interested in chances are I am working on it now or would be willing to do it with enough interest from others.  So please ask if you need something and don't see it.

***All products are the prices below plus shipping and PP fees.

------------------------------------------------------------------

CURRENT PROJECTS I MAKE:
Drip Ultra: (Drip's PCB or any other, http://www.dripelectronics.com/index.php?option=com_content&view=article&id=6&Itemid=33)
Sell: $130.00 + Shipping

LA2A: (Drip's PCB or any other)
Sell: $130.00 + shipping

LA2A Point to Point: (Back panel cut out for most all holes and 5.5" deep chassis)
Sell: $135.00 + shipping

Opto 4: (Drip's PCB, http://www.dripelectronics.com/index.php?option=com_content&view=article&id=8&Itemid=31)
Sell: $140.00 + shipping

Dual LA2A: (SILENT ART'S boards)
Sell: $150.00 + shipping
Photo's here - http://www.groupdiy.com/index.php?topic=41963.msg539218#msg539218

PULTEC: (Drip's PCB or any other, http://www.dripelectronics.com/)
Sell: $130.00 + shipping

2U PULTEC: (Drip's PCB or any other)
Sell: $130.00 + shipping

2U G-PULTEC:
Sell: $140.00 + shipping
Photo here - http://www.groupdiy.com/index.php?topic=41963.msg561039#msg561039

2U G9:
Sell: $150.00 + shipping
Photo here - http://groupdiy.com/index.php?topic=41963.msg733552#msg733552

GSSL:
Sell: $140.00 + shipping
Photo here - http://groupdiy.com/index.php?topic=41963.msg733552#msg733552

Stereo 1176: (HAIRBALL's KIT, http://hairballaudio.com/shop/product_info.php?cPath=22&products_id=79)
Sell: $150.00 + shipping
Photo's here - http://www.groupdiy.com/index.php?topic=41963.msg539218#msg539218

DBX 160 VU: (ABE's KIT of AC Sound, http://store.acsoundstudio.com/)
Sell: $150.00 + Shipping

PRR - 176 Stereo Compressor: (ABE's KIT of AC Sound, http://store.acsoundstudio.com/)
Sell: $150.00 + Shipping
Photo's here - http://www.groupdiy.com/index.php?topic=41963.msg613908#msg613908

Stereo Sontec: (IGORS KIT)
Sell: $140.00 + Shipping
Photo's here - http://www.groupdiy.com/index.php?topic=41963.msg589556#msg589556

Stereo Sontec MS Version: (IGORS MS KIT)
Sell: $150.00 + Shipping

Great River MP-2 Pre's: (no silk screen, just hole cut outs)
Sell: $110.00 + Shipping

EZ 1290 (Martin Adriaanse's boards: purchase the pcb's from him through email martin_adriaanse at yahoo dot com)
Sell: $140.00 + Shipping

EZ 1084 (Bluzzi's boards http://www.groupdiy.com/index.php?topic=50037.0 )
Sell: $140.00 + Shipping
Photo's here - http://www.groupdiy.com/index.php?topic=41963.msg613908#msg613908

EZ 1073 (Colin's boards http://www.audiomaintenance.com/acatalog/aml-17-020_extended_info.html )
Sell: $150.00 + Shipping

Access 312 Mic Pre Case (3nity's PCB's I now sell these. Build thread here http://groupdiy.com/index.php?topic=46362.0)
Sell: $140.00 + Shipping

SnB: (Serpant Audio PCB, Front panel and back panel silk screened, http://www.serpentaudio.com)
Sell: $150.00 + shipping
Photo's here - http://www.groupdiy.com/index.php?topic=41963.msg588865#msg588865

Sta-Level: (Drip PCB's http://www.dripelectronics.com/index.php?option=com_content&view=article&id=31&Itemid=59)
Sell: $150.00 + shipping

BA6A: (Drip PCB's 14" deep chassis http://www.dripelectronics.com/ba6a/)
Sell: $175.00 + shipping
Photo here - http://www.groupdiy.com/index.php?topic=41963.msg636499#msg636499

175b 2U: (Drip PCB's http://www.dripelectronics.com/index.php?option=com_content&view=article&id=27&Itemid=55)
Sell: $150.00 + shipping

Harrison Ford Filters: (Strange Weathers Design and PCB's) Build Thread here - http://groupdiy.com/index.php?topic=46390.0
Sell: $135.00 + shipping

Harrison Ford Filters PCB's & Pots: (you can order these from me directly)
PCB's Sell: $5.00 + shipping

Kit (case purchased separate): $475 + shipping - Kits include parts for 8 channels: Knobs, Push botton caps, switches, pots, PCB's, resistors, caps (Wima's for the filters), IC's, IC sockets, IEC inlet, DB25 connectors and Molex headers, crimps pins.  You need the case and front panel seprataley, the PSU and power lamp. 

Kit & Case Comb Sell:  $600 + Shipping

Fairchild 670: (Drip PCB's http://www.dripelectronics.com)
Sell: $600.00 + shipping
Photo here - http://www.groupdiy.com/index.php?topic=41963.msg663120#msg663120



------------------------------------------------------------------

3U Basic:
Sell: $90 + Shipping

2U Basic:
Sell: $85 + Shipping

1U Basic:
Sell: $80 + Shipping

------------------------------------------------------------------

500 / 51x cases:
3 space 1U: (no silk screen, just hole cut outs.  DMP's PCB's are 4USD each and I carry these as well.)
Sell: $110.00 + Shipping
Photo's here - http://www.groupdiy.com/index.php?topic=41963.msg650894#msg650894 & http://www.groupdiy.com/index.php?topic=52896.msg675180#msg675180

2 space 1U: (no silk screen, just hole cut outs.  DMP's PCB's are 4USD each and I carry these as well.)
Sell: $110.00 + Shipping

------------------------------------------------------------------

PSU Cases ($65 USD + Shipping): Photos here - (http://www.groupdiy.com/index.php?topic=41963.msg618199#msg618199)
Tube Mic PSU (XLR version):
2 XLR, switch hole on one side.  IEC, Lamp and Power Switch on the other side.

Tube Mic PSU (Binder version):
1 Binder, 1 XLR and a switch hole on one side.  IEC, Lamp and Power Switch on the other side.

External PSU:
2 switch holes & 2 Lamp Holes (main, and 48v) on one side.  IEC and XLR out on the other side.

------------------------------------------------------------------

Basic info on the chassis:
The Basic Cases are designed to be easy for you to use with your personal projects and designs. The back panels are cut out with one of two standard options.

Mono - 1 set of XLR holes for an input and output, star ground, and the IEC inlet
Stereo - 2 sets of XLR holes for stereo inputs and outputs, star ground, and the IEC inlet

FINISHES:
All cases will be powder coated black. (Holes are masked for good grounding through out the case.)

MADE IN THE USA, ENCLOSURE DETAILS:
1. 18 gauge metal cases
2. Rear panel XLR, IEC, and star ground cutouts
3. Optional 19" aluminum face plates – powder coated black or left aluminum
4. 5.5", 9", 11" and 14" deep (5.5" and 14" only in 2U and 3U versions)
5. 17" wide case
6. Vent holes on tops and sides
7. Clean outside for easy installation in racks
8. Ships flat for lower shipping cost

ENCLOSURE INCLUDES
* 1 top & bottom panel
* 1 rear panel
* 2 side panels

Recommended components:
XLR's - Nuetrik D series connectors
IEC - Schurter 6200.2100 (Mouser Part # 693-6200.2100)
DB25 - Tyco Electronics (Mouser Part # 571-5-747912-2)



*****NOTE******
Pricing may need be adjusted at some point.

Prices are given excluding local taxes, shipping and paypal charges.

More and better pictures coming soon...

 

[Randyman...]

I'm interested in a 2RU Basic Stereo chassis for the SA3A.  What's the ETA on these?

Masking the holes is a nice touch!

Thanks  8)

 

[nickeveslage]

Good to see some (relatively) local stuff happening! I'm in St.Cloud. I'll probably be placing an order with you in the next couple months.

Very cool!

 

[jsteiger]

Hey Dan,

Welcome to the White Market my friend! 

I am very happy to see you handling high quality cases and enclosures. I think there has been a need around Prodigy for something like this...especially for us US based folks!  ;D

Best of luck on your new venture.

I still see a VP4.312 in our near future... 8)

Cheers, Jeff

 

[Ian]

This is a great idea. I HATE cutting holes for XLRs and IEC sockets!!!!!

 

[dandeurloo]

Randyman.. These are very close.  All the design and protos are done.  Just need to organize who wants what.  So, if you want one I will confirm you for one!  I will be stocking a number of things as well.   

Thanks for the comment about the masking.  I have put a ton of effort into designing these so they are high quality and easy to use!  Its been a fun project and I hope they are helpful to you guys.

Jeff, Thanks!  Guys like you have done such an excellent job of offering a great product that serves the communtiy.  Hopefully I can contrubite even a fraction as much as you and others have.

BTW, I love the idea of a VP4.312!

Ian and Nick, thanks as well.  Ian, I'm often in Nashville as well working on records!  Just got back before thanksgiving from there again.  Would love to meet ya sometime.

 

[Echo North]

Awesome Dan!

I'm looking forward to some orders and some collaboration.

Keep up the good work!

Mike

 

[ChrioN]

Got any pics of the pultec front? Great this is 

 

[JamesW]

And a pic of LA2A

 

[leitrim_lad]

Hey id definately be interested in a 2U rack for the la3a. Have you any idea how much shipping would be to Ireland?

Cheers

Leo

 

[rrs]

I'll take one case for a stereo LA3a. (SA-3A)

 

[dandeurloo]

Ok, I'll put up a list of confirmed orders soon.  A number of you guys have emailed me as well so feel free to do that also.


Side note:
I've tested a number of the Hairball's meters in the cases and they fit and look great!  Mike sure has some great meters.  I will be making most all of the cases to go with his meters.  Seems to be the best solution for quality, price and easy.

 

[dandeurloo]

Hey Guys, I need to know who is in for what on this first run ASAP.   I want to start this order so guys who are waiting can get there cases.  I'm starting this first run small to start off.  Because of this, first run supplies will be very limited.  If you are interested in getting in on this run, please preorder and reserve yours at [email protected].

Here is the list of confirmed case orders so far.  I will mark paid behind your name once I receive payment.

Dmp:PAID
(2 qty) x 1U Basic stereo cases
(1 qty) x 2U Custom Machining stereo cases

GrantLack: PAID
(6 qty) x 1U Basic stereo cases
(1 qty) x 2U Basic stereo cases

rrs: PAID
(1 qty) x 2U Basic stereo case

leitrim_lad:
(1 qty) x 2U Basic stereo case

Randyman:
(1 qty) x 2U Basic stereo case

 

[dmp]

Sent payment today -
Thanks Dan!

 

[FerrariT]

Local pick-ups to avoid shipping charges?

 

[dandeurloo]

For sure, I have 2 other guys doing that already!

 

[FerrariT]

That is swell to know. Do you plan on doing 1176 cases for Mike as well?
Thanks.

 

[dandeurloo]

Well, Mike and I have been working on a stereo case for the last few days!  That is the only case I will be handling for his 1176 kits.  If you are looking for mono 1176's his cases are perfect.  I will be getting my protos in for the Stereo Fet with the next run of cases so we are much closer then we had been!  Maybe upload a PDF to my website soon of it.

 

[grantlack]

For sure, I have 2 other guys doing that already!

do i hear a midwest meeting?  check's inked and stamped btw!

if anybody's considering an order from dan, let me encourage you in the utmost.  having never spoken to him previously, in the past couple weeks we've talked cases and diy for at least three solid hours since.  i can say from what i have in the works that he's quick on his feet with layout for custom designs, and has been nothing but helpful with insights and suggestions in how to get the best final product.  from what he's told me, there are some great things coming down the pipe.  (proof positive with the dual 1176's!)

 

[rrs]

Sent payment 1 stereo 2U Case.

Thanks.