Crimptool for molex KK Crimp Terminal

[dryman]

After some painful manual attempts on crimping, i am looking for a payable Crimptool for KK-Molex-Terminals. On my search, i found this one:

<http://www.digikey.com/product-detail/en/W-HT-1921/WM9900-ND/26396>

which seems to do his job, but i want to know, if there are some better tools, below 50$? The better ones, above 200$, are looking very nice, but i have to crimp maybe once a month, so i will be a little bit overkill.

 

[volker]

Search Reichelt for "CRIMPZANGE PSK", cheap and works very well. Connectors are also available ("PSK" & "PSS").

 

[dryman]

Thanks a lot, that's what i am looking for.

 

[abechap024]

if you are close to a walmart, go to their diy jewelry section, or craft area, there they have an awesome crimping tool for 12 bucks. Best 12 bucks i ever spent!

 

[dryman]

Thanks for your hint, but we don't have Walmart in germany anymore. Even 5 years ago, when there were several Walmarts in Germany i haven't seen one with a jewelry section. But i will keep your hint in mind, if i come to a country, which has Walmart, i will have a look.

 

[abechap024]

Thanks for your hint, but we don't have Walmart in germany anymore. Even 5 years ago, when there were several Walmarts in Germany i haven't seen one with a jewelry section. But i will keep your hint in mind, if i come to a country, which has Walmart, i will have a look.

just tried to type "jewelry crimper" into eBay and there were a ton of results. ha! wish i knew that before. anyway goodluck!

 

[justanalogue]

Just look for the Waldom WHT-1921 , I got mine at a pinball parts store in the Netherlands for about 35 €uro's.

Willem.

 

[riggler]

There is a crimper available from Radio Shack that works perfectly on the KK terminals.
http://www.radioshack.com/product/index.jsp?productId=2103683

I have an AMP crimper that works too, but it is old and probably still expensive.