howdy,
Ive been looking and looking on this site, but I cant find any info on the PSU for the D-47 Board. I have the build guide and its really straight ahead, but in the BOM there were a couple of resistors that I cant seem to figure out what they are for. on the Board there is R1/Choke that doesn't have anything occupying it and I just wanted to make sure that I'm not missing anything. The 2 resistors that seem to be extra are Xicon 10w 1K5 im trying to attached in a file also. I think I'm all good, but I just wanted to ask as there are lots of people here that know much more than I do...
Thanks so much
edit: I have tried several times to reply to my own post and add another picture to show what the board looks like, but I am unable. I think I'm ok with what I have as I look at the schematic for the MK47psu that ive found. this board and the MK47 board differ slightly as the MK board has an LED and this one doesn't. With all that said if anyone has any experience working with this sucker and can chime in that would rock! I think I'm good, but I figure its better to ask and find out rather than not ask and be wrong. The board is at
http://www.vintagemicrophonepcbkit.com/D-47.html
mine looks like the one that is finished in the bottom picture, but the extra 2 pieces confused me am looking through the information I have I can't seem to see where they go...thanks again
edit: edit: I got it. There is a form I was given I didn't see that explains what these are for...thought I was losing my head for a minute
Ive been looking and looking on this site, but I cant find any info on the PSU for the D-47 Board. I have the build guide and its really straight ahead, but in the BOM there were a couple of resistors that I cant seem to figure out what they are for. on the Board there is R1/Choke that doesn't have anything occupying it and I just wanted to make sure that I'm not missing anything. The 2 resistors that seem to be extra are Xicon 10w 1K5 im trying to attached in a file also. I think I'm all good, but I just wanted to ask as there are lots of people here that know much more than I do...
Thanks so much
edit: I have tried several times to reply to my own post and add another picture to show what the board looks like, but I am unable. I think I'm ok with what I have as I look at the schematic for the MK47psu that ive found. this board and the MK47 board differ slightly as the MK board has an LED and this one doesn't. With all that said if anyone has any experience working with this sucker and can chime in that would rock! I think I'm good, but I figure its better to ask and find out rather than not ask and be wrong. The board is at
http://www.vintagemicrophonepcbkit.com/D-47.html
mine looks like the one that is finished in the bottom picture, but the extra 2 pieces confused me am looking through the information I have I can't seem to see where they go...thanks again
edit: edit: I got it. There is a form I was given I didn't see that explains what these are for...thought I was losing my head for a minute