DB25 - Any recommendations for shells

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I used to work at a studio where all looms were wired to Hartings. The connectors were originally designed for use in tanks. They are amazing but cost a small fortune.
The connector on the Neumann SX68/74 cutter heads are Hartings. They are still made but require an MOQ of 100 pcs at about $30 each. Ouch. No one has ponied up yet.
 

Latest posts

Back
Top