Dcarrow555
Member
- Joined
- Sep 3, 2016
- Messages
- 14
Its time to clear out some of the projects and make room for more.
Pictures.: https://www.dropbox.com/sh/npubyq254umd09e/AAA39Othr3-0oqcK0Z-7z8WSa?dl=0
Hand made Neumann u87 Clone microphone. This is one of several DIY mics iv built, it sounds amazing!
The circuit board is by Dany Bouchard v1.2
Capsule is the RK-87 from MicraphoneParts.com
Transformer is the CineMag The CM-2480 16.5k:150 (10.5:1)
There is an internal jumper for both a -10dB pad as well as a low cut. There is a 3 position switch on the inside of the mic to switch between Omni, Figure of 8 and Cardioid. The body used for this mic is an MXL 2001.
This mic sounds absolutely amazing, I have used it for podcast and voice over recordings as well as music.
DM if interested or need more info.
Pictures.: https://www.dropbox.com/sh/npubyq254umd09e/AAA39Othr3-0oqcK0Z-7z8WSa?dl=0
Hand made Neumann u87 Clone microphone. This is one of several DIY mics iv built, it sounds amazing!
The circuit board is by Dany Bouchard v1.2
Capsule is the RK-87 from MicraphoneParts.com
Transformer is the CineMag The CM-2480 16.5k:150 (10.5:1)
There is an internal jumper for both a -10dB pad as well as a low cut. There is a 3 position switch on the inside of the mic to switch between Omni, Figure of 8 and Cardioid. The body used for this mic is an MXL 2001.
This mic sounds absolutely amazing, I have used it for podcast and voice over recordings as well as music.
DM if interested or need more info.
