Feeler for D-47FET PCB for Alctron U47 type Donor

Help Support GroupDIY:

poctop

Well-known member
White Market Member
Joined
Jul 15, 2009
Messages
2,263
Feeler for D-47FET PCB for Alctron U47 type Donor


it would stand piggy with keystone brackets .
http://ca.mouser.com/ProductDetail/Keystone-Electronics/621/?qs=sGAEpiMZZMsQtlBhqKq43RRKyy%2fQ5h95

with transformer Support For Cinemag Fet Classic Reproduction
http://cinemag.biz/mic_output/PDF/CM-13101.pdf

58d1402a07ee6.jpg


BOM with Screws and Brackets
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=4bdecadc37


it could be an alternative for those who cant handle tubes yet , Simple FET design, Self Bias,  with the nice feature of the U47 Style Mic body. But Still a Classic Mic.

DMain47F.jpg


58d028199447e.jpg



Let me know
Best,
Dan,

 

poctop

Well-known member
White Market Member
Joined
Jul 15, 2009
Messages
2,263
micaddict said:
I didn't mean to hijack BTW.

Nothing at all wrong with a U47fet in a long body.  :)
No Worry Henk,
if you meant a stereo pair yes  ;)
best
Dan,
 

poctop

Well-known member
White Market Member
Joined
Jul 15, 2009
Messages
2,263
I went ahead and printed a couple (10) of these anyway just in case someone would like to try them out  in a long term future,
Best,  :)
Dan,

 

poctop

Well-known member
White Market Member
Joined
Jul 15, 2009
Messages
2,263
Upacesky said:
I don't really get the difference between this version and the one you already sell in your store.

This version has been reworked for on board support for transformer ( Cinemag 13101 Footprints) , and also the footprints have been adjusted in consequence to fit the alctron 47 mic body in a piggy back style pcb configuration ,  the footprints and clearance allows installation of keystone mouting bracket inside the railing . In short they a similar but not the same.
Best,
Dan,
 

Guff

Active member
Joined
Apr 8, 2013
Messages
25
Dan, did you receive these boards? I never saw them put up on the web store.
 

poctop

Well-known member
White Market Member
Joined
Jul 15, 2009
Messages
2,263
Hi Guff, i just did not have time to picture them and introduce them in the webstore yet but i have em here , if you need some PM me.
Best,
Dan, <

 

poctop

Well-known member
White Market Member
Joined
Jul 15, 2009
Messages
2,263
Mic body for this project are now available here


http://store.studio939.com/category/microphones-and-parts

http://groupdiy.com/index.php?topic=50015.880

http://groupdiy.com/index.php?topic=58609.0
 

Latest posts

Top