fucanay
Well-known member
abby normal said:fucanay said:See anything in the schematic that could be a place to look? Usually it would be a cap that would filter a frequency, right? And to me it looks like there are only 2 caps in the signal path, C2 and C4.
Matt
Are you using those 220nf's off those 47k resistors? If so and just for shits and grins could you disconnect those to see if your issue is resolved? Or at best could you tell me the difference between them being in the circuit or not?
I don't want to start yanking parts out until there is a reason expectation that it may fix the problem. These boards are hard to de-solder parts from. I'm going to open it up tonight and check everything again.