usekgb
Well-known member
I would like to add an impedance balanced output to this pre as referenced here:
http://www.jensen-transformers.com/an/an003.pdf
Can I simply wire another 10uF cap from pin 3 to ground, or would I need to add another resistor as well. I am unsure of the existing output impedance of the circuit, and what value, if any, resistor to add. This is for a very compact portable build, and I just don't have room for an output transformer. Thanks for the help!
http://www.jensen-transformers.com/an/an003.pdf
Can I simply wire another 10uF cap from pin 3 to ground, or would I need to add another resistor as well. I am unsure of the existing output impedance of the circuit, and what value, if any, resistor to add. This is for a very compact portable build, and I just don't have room for an output transformer. Thanks for the help!