Well, sort of finished anyway.
I proud present my first real DIY-project:
- 2 ch ssl9k, with JML Go-between and 1ch DI
- 2 ch Harrison Ford Filter
The pre and filter can be linked or used as separate units
The knobs/pots are:
DI, Ø, Pad, Gain (2x), link on/off, Lowpass, highpass, bypass (filter) (2x), power
The link is wired from the jacks, so it's not bypassing the out/in balancing. Could just use a jack on the back or my patchbay, but.. think this is more elegant.
I proud present my first real DIY-project:
- 2 ch ssl9k, with JML Go-between and 1ch DI
- 2 ch Harrison Ford Filter
The pre and filter can be linked or used as separate units
The knobs/pots are:
DI, Ø, Pad, Gain (2x), link on/off, Lowpass, highpass, bypass (filter) (2x), power
The link is wired from the jacks, so it's not bypassing the out/in balancing. Could just use a jack on the back or my patchbay, but.. think this is more elegant.