-
If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
FS 2x Barry Porter Net EQ PCBs
- Thread starter andow
- Start date
Help Support GroupDIY Audio Forum:
andow said:
Even though that's expensive
okgb
Well-known member
can you post a pic ? some of those grinder pcb's had a tarnished look to them.
still available?
Yes
okgb
Well-known member
The tarnish if there is on the trace side.
No tarnish at all....
MidnightArrakis
Well-known member
I recently came across the comments shown below about the "Barry Porter NetEQ" PCB's:
Seems Barry's own notes said this: "If untapped pots are used, the sections will interact quite severely and the constant Q characteristic will be lost."
The "current" BOM and board silkscreen seems to have some mistakes. I am trusting the schematic on this one. Please any corrections welcomed.
Just sayin'.....
/
