wstratton
Active member
Hi all,
I had been building my own D-EF47, but I've become a bit squeamish about the high voltage involved in some of the final steps, including wiring and testing the PSU. So I've decided to opt for something with a pre-built PSU, and piece out most of the parts I have acquired to whoever wants them on this board (and is willing to pay a reasonably discounted amount for them). Here's what I've got:
An extremely lovely hand-machined 56mm body for a U-47 project built by board member Spencer Lee Horton with Amphenol connector
A mostly-completed D-EF47 PCB containing AMI's T47 transformer, with two NOS EF-80 tubes
A PSU case from Collective Cases, with mostly-completed D-EF47 PSU PCB and related components (not everything needed to complete the PSU, but most of it--I don't have the on-off switch or LED jewel, and BYO wiring)
Pictures attached and following--feel free to ask me questions about any of these items.
I had been building my own D-EF47, but I've become a bit squeamish about the high voltage involved in some of the final steps, including wiring and testing the PSU. So I've decided to opt for something with a pre-built PSU, and piece out most of the parts I have acquired to whoever wants them on this board (and is willing to pay a reasonably discounted amount for them). Here's what I've got:
An extremely lovely hand-machined 56mm body for a U-47 project built by board member Spencer Lee Horton with Amphenol connector
A mostly-completed D-EF47 PCB containing AMI's T47 transformer, with two NOS EF-80 tubes
A PSU case from Collective Cases, with mostly-completed D-EF47 PSU PCB and related components (not everything needed to complete the PSU, but most of it--I don't have the on-off switch or LED jewel, and BYO wiring)
Pictures attached and following--feel free to ask me questions about any of these items.