FS: My Entire Stash!! DIY Retirement Sale

[benlindell]

Hey guys,

It's been quite a while, I hope everyone is doing well!

I've been busy on other projects and running my agency the last year so I am finally coming to terms with the fact that I will never have a chance to get back to DIY so it's time to stop hoarding projects, PCBs and parts.

ALL PRICE ARE NEGOTIABLE! If you see something you're interested in email me and we'll work something out.

Please email me about these - ben (at) benlindell (dot) com

Updated! New items and Pictures!

2x Point to Point Pultecs (Sowter Txs and inductors, Caps, Tubes, Pots, Power Txs) - Filter boards are assembled have all parts to complete - $900
http://imgur.com/a/xM5WH

2x PeterC 5003 EQ 500 series - fully built and working, API 553 style EQ - $500
http://i.imgur.com/la7R6xE.jpg
http://i.imgur.com/H2PgsBr.jpg

4x APP Studio LED Bar Meters PCBs - $30
http://groupdiy.com/index.php?topic=33576.0

2x APP Studio Balancing PCBs -  $25
http://groupdiy.com/index.php?topic=33576.0

2x DBX 2001 VCAs - bought these for a GSSL that never happened, untested - $100
http://i.imgur.com/BucBOqc.jpg

4x Sifam AL29 VU Meters - 3 came from a console, 1 brand new, all of them have the mounting hardware - $120
http://i.imgur.com/0ElpxL9.jpg

4ms pedal Phaseur pedal - Fully built but never got it working, needs a good trouble shooter - $20
http://i.imgur.com/X1CFcy0.jpg
http://i.imgur.com/wCEDwmn.jpg

Digital Caliper - needs a fresh battery - $10
http://i.imgur.com/uJtfIVp.jpg

Hairball Audio 1176 Stereo kit fully stuffed - $5
http://i.imgur.com/kaADSPA.jpg

Lorlin 2x6 switches $10
http://i.imgur.com/mUb51lU.jpg

Neumann K87 capsules, no mounts and untested - $30 SOLD
http://i.imgur.com/cM92a4F.jpg

2x Simple Microphone PSU PCB - $10
http://i.imgur.com/LpRvU02.jpg
http://i.imgur.com/eEVRuwN.jpg

4 Edcor to Lundalh transformer adaptors (I used them for the GPultec project) - $10
http://i.imgur.com/qLXgRKj.jpg

4 1290 Guitar pedal enclosures - $20
http://i.imgur.com/p3ThY1Z.jpg

Pre-drilled 125B Guitar pedal enclosure - $5
http://i.imgur.com/vz8BaxJ.jpg


Power Transformers
$7 each

Antek 0115 - http://i.imgur.com/AtIK3Bv.jpg
2x Antek 0206 - http://i.imgur.com/Wk4CJhC.jpg
Antek 0215 - http://i.imgur.com/fYefMMl.jpg
Antek 0220 - http://i.imgur.com/7KeaC17.jpg
Avel 25V - http://i.imgur.com/c0TmtKa.jpg
Edcor 48V - http://i.imgur.com/UHS4Prx.jpg

KNOBS

32x Silver knobs - $30
http://i.imgur.com/Nk6oe4i.jpg

8x Neve style collet knobs - $15
http://i.imgur.com/e0ARtvZ.jpg

4x Big oven knobs - $5
http://i.imgur.com/vDxeED7.jpg

4x Big black smooth knobs - $5
http://i.imgur.com/wWZsU3C.jpg

4x Big black pointer knobs flat tops - $5
http://i.imgur.com/EJVhEGB.jpg

4x Small silver knobs - $4
http://i.imgur.com/mT19VzO.jpg

24x plastic D-shaft knobs - $10
http://i.imgur.com/z558Bca.jpg

Pot Condoms - great for guitar pedals and keeping pots from shorting against the PCB - $5
http://i.imgur.com/MYHBClB.jpg

Lots of screws and washers - $10
http://i.imgur.com/wfFQr0o.jpg

Quick Connects - $5
http://i.imgur.com/5uUWM66.jpg

Moog Pocket Protectors - $free with any order!
http://i.imgur.com/j1qN8TJ.jpg



SOLD ITEMS

Triplett Vintage VU Meter - got this on eBay forever ago, haven't had a chance to test it - $10
http://i.imgur.com/8MQWJfU.jpg

2x Componex VU Meters - $20
http://i.imgur.com/f1PKLBk.jpg

2x OEP A26A3E transformer - $20
http://i.imgur.com/m7tQPTr.jpg

2x OEP A26A2E transformers - $20
http://i.imgur.com/m7tQPTr.jpg

2x Edcor XS150-1800 - came with a project, don't have the pin out so will require some effort - $10
http://i.imgur.com/PE5xa1o.jpg

2x Edcor  XS500-200 transformers - came with a project, don't have the pin out so will require some effort - $10
http://i.imgur.com/PE5xa1o.jpg

Approx 200x 2N5457 transistors for 1176s - I went matching crazy and bought in bulk - $30
http://i.imgur.com/2n0Buf8.jpg

Seeed Studio Digital Oscilloscope - not the greatest resolution but fine for checking signal, runs on 9V power adaptor - $15
http://i.imgur.com/ipWIN2i.jpg

12x Silver Kilo knobs - $20
http://i.imgur.com/tzc33f4.jpg

12x Black kilo knobs - $20
http://i.imgur.com/6FvZvfa.jpg

4x Big black pointer knobs - $5
http://i.imgur.com/5SRJK5v.jpg

PM660 (Edcor Txs, Elma Switches, Power Tx, NOS tubes, Yamaha VU) - Fully stuffed just needs wiring - $250 - SOLD

4 Franks Enhanced Pultecs (Stepped pots, fully stuffed just need wiring) - $400 - SOLD

2 LAZPro EQAs (500 series 3 band EQ with High and Low filters) - Both are built, one working perfect and the other needs repair - $400 - SOLD

3 LAZPro 525 (500 series 525 clones with 990 opamps) - 2 working, 1 needs troubleshooting and final assembly - $600 - SOLD

Stereo G1176 (Lundahl Txs, All parts except case and power Tx, Stereo link kit) - $200 - SOLD

2 EZ760 (Compex compressor, full kit and boards) - $400 - SOLD

2 SSL 4K Preamps (500 series with and Cinemag Tx) - $120 - SOLD

8 Harrison Filters PCBs- $24 - SOLD

2 CLX-VU (DBX160vu clone) PCBs - $40 -SOLD

Stereo Rude Tube PCBs - $30 - SOLD

2 SSL EQ PCBs - $40 - SOLD

4 Poor-Mans Pultec Pro (EQ1A + MEQ + I/O boards) - $100 - SOLD

2 G9 51X (500 series tube preamps with faceplates and brackets) - $50 - SOLD

Forsell Optical Compressor PCB - $10 - SOLD

2 Nite EQ PCBs - $20 SOLD

2 Mid/Side Matrix PCBs $40 - SOLD

 

[jackies]

I'll take 2 Nite EQ PCBs - $20, please!

 

[Potato Cakes]

PM sent about the EZ760

 

[okgb]

Dam you!
o.k. emailed about the 51x g9's & franks

 

[pucho812]

are the prices  listed for each or is  it for the whole lot. for example say the 3 X lapro's is that 600 for all 3?

 

[duantro]

I'll take the mid side matrix boards. Also curious about the lot pricing.

 

[mitsos]

Woud like the SSL EQs + Forsell comp + Harrison filter PCBs please.

thanks, hope all is well.

 

[Floti]

I´ll take the pair of CLX VU PCBs!

 

[weiss]

Pm on nite eq&ssl eq

 

[thismanysounds]

I'll take the CLX PCBs if they don't end up with Floti.

 

[pvision]

I'll take the stereo G1176

 

[shabtek]

emailed re: forselll etc.

 

[Chrys]

Ben
I emailed you for ssl eq

☺

 

[adrian]

I just emailed for your LAZ 525 comp

 

[duantro]

Have any photos of the EQA's and details of transformers/ opamps used?

 

[benlindell]

Thanks for the help guys, marked all the sold items as gone, price dropped a few and will add some more Saturday.

 

[jonathanmorbin]

Hi, Out of interest what were the mid side/matrix PCB's? as in where did you buy them from in the first place...

 

[Bornhorst]

Emailed about the SSL 4K Pre's and the PM660
Thanks!

 

[mylesgm]

Hi Ben, Interested in the 4k preamps, what's included in the kit?  thanks.

 

[benlindell]

Shipped all paid orders except for one yesterday, new items coming soon.