Reply to thread

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I did this (quite badly) many decades ago.Pre surface mount days. These days I would might try doing it with P48/phantom powering. Just buffering with a TL072, would get rid of a lot of hum problems and sending balanced, but with only one line driven would keep most of the CMRR advantages. A hum bucker wasn't needed in my case, but was added for fun, with  a pot to trim for minimum smoke.


M


Back
Top