G1176 R50 8k2?

Help Support GroupDIY:

mnats

Well-known member
Joined
Jun 3, 2004
Messages
984
Location
Australia
Sorry if this has been asked before - I did a search on some old TT pages I archived and on Orson's page but couldn't find the answer.

The schematic provided for the Gyraf 1176 shows R50 with a value of 8k2 near the meter switching circuit. But the METER PCB in the layout shows only R51, the 3k6 resistor. It looks like the +8 position has been eliminated from the front panel example but I couldn't find any reference to it in the text.

What is the reason this was left out of the clone?
 

gyraf

Well-known member
Staff member
Moderator
Joined
Jun 4, 2004
Messages
10,214
Location
Aarhus, Denmark
because the meter switch is a 3-position switch, used for bypass-gr-vu+4 (look at the front panel)

I've never used the +8 position. ever.

Jakob E.
 

matthias

Well-known member
Joined
Jun 4, 2004
Messages
768
Location
germany / frankfurt
sorry, it's not related to this topic,
but jakob, can you say something to the differences in the output stage between your G1176 and the 1176 rev. F/K
look at that thread...
http://www.groupdiy.com/index.php?topic=548


thank you ...
matthias
 

Latest posts

Top