basementmedia
Active member
- Joined
- Nov 16, 2008
- Messages
- 25
Hi,
i've finished a G1176 Unit and in principle it seems to work, but one thing is very strange:
When i feed the input with an -1db 1000Hz sinus and select the +4, +8 or GR option
i get -15db at output with Q-Bias already turned fully CCW. if i turn Q-Bias CW the drop increases).
And when i push the bypassknob i get the opposite: Distortion (over 0 db) at the output (with input and output at 12 o clock).
Any suggestions?
I have checked all cable connections more than one time and also the solder work seems to be ok (no bridges) and the function of the compression is ok (attack and release work as they should do).
So it seems to be a pure gain problem...
Every help is appreciated!
I hope you understand my bad english...
Greetings
Daniel
i've finished a G1176 Unit and in principle it seems to work, but one thing is very strange:
When i feed the input with an -1db 1000Hz sinus and select the +4, +8 or GR option
i get -15db at output with Q-Bias already turned fully CCW. if i turn Q-Bias CW the drop increases).
And when i push the bypassknob i get the opposite: Distortion (over 0 db) at the output (with input and output at 12 o clock).
Any suggestions?
I have checked all cable connections more than one time and also the solder work seems to be ok (no bridges) and the function of the compression is ok (attack and release work as they should do).
So it seems to be a pure gain problem...
Every help is appreciated!
I hope you understand my bad english...
Greetings
Daniel