Reply to thread

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Thanks salomonander :)


Yes it's quite a trip - but we're getting there!





Nope - we didn't "fix" that.

If we had done so, we'd have needed to retrace the entire board, and we decided to stay original.

Not a big deal I think - both caps placed next to each other and on one end their (shrink-tubed) wires cross. :)


BTW the first board is stuffed and ready to go into the chassis, but I have to wire up that part of the chassis' back panel first, otherwise the access to the relevant terminals of the transformers will be blocked by the pcb...




I'm now stuffing the 2nd pcb and mounting all components to the back and front of the chassis - stay tuned...


Oh and you're more than welcome to leave a comment or share some thoughts - I just realized this thread has more than 600 views already, but only 2 people involved so far ;)


Back
Top