gssl calibration guides?

[fandusss]

Hey guys,

I'm new around here and am at the end of my first build. Everything went flawlessly and the unit sounds great.

I was wondering if anyone ever compiled a guide on tests and calibrations for the gssl? I'm a bit of a noob and having a checklist of sorts, just to make sure everything is correct would be fantastic. I've used the search function but haven't found it.

I have a few specific questions I might ask if no such guide exists.


Thanks,

Andy.

 

[gyraf]

there is no calibration for the gssl - see the original build page over at gyraf.dk..

Jakob E.

 

[mitsos]

You can calibrate unity, ratio, the meter etc by switching some resistors for trimpots. Check the calibration guide for the SB4000 project and compare the schematics to see where to put the trimpots to calibrate the GSSL.

 

[fandusss]

You can calibrate unity, ratio, the meter etc by switching some resistors for trimpots. Check the calibration guide for the SB4000 project and compare the schematics to see where to put the trimpots to calibrate the GSSL.

Thanks mitsos, this was exactly what I was after.