Reply to thread

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

 i finally find a way to reduce the THD to less than 1% when full comp that allow me to make it pumping with not a lot of noticeable distortion. I filtered the Voltage control of the VCA with a 100uF cap. Try it and let me know

Sounding result is a lot better than before when huge compression is apply.  This mods slow down a little bit the attack but by readjusting resistors value i will set the correct attack.  Bad idea too cause minimum attack time can't go lower than 10mS  :(


Here is the result


Back
Top