Hill Audio Ltd. ( remix console 24/8/16/2) Need schematics and PSU info

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

maxwall

Well-known member
Joined
Nov 17, 2004
Messages
1,134
Hill Audio Ltd. Remix recording console 24/8/16/2

Received this board with no power supply and I cannot locate any free schematics or find any
information on the wwweb for Power supply voltages. I plan to build my own outboard power supply.

I think the voltages are +/- 17 , +48 and possibly 5Vdc for leds, not sure. If I can get the correct voltages for this power supply , than I can build a supply for the board.

Any help appreciated.

If there any spare parts around I need :

1. two black VU meter bezels ( Compex 2LX type ) same as trident 24 console.
2. (1) 100 mm slider push on knob, white body black line, fits 8mm x 1.2mm tang.
    body is 26mm long x 10mm high x 10mm wide, part# 02/LK151 01 Sifam brand.
3. (1) round 10mm top, two color w/pointer gray top with d shaft 4mm , Sifam brand.
4. (1) pot for aux level control ( 4mm  d shaft, push on type).
5. Neutrik 5 pin XLR male, cable end type.


Finally found it , thanks




 

Latest posts

Back
Top