How to add thick grease to an Encoder Knob for better "feel"

[Phrazemaster]

Hi everyone, it's been ages since I've posted here; how are you all?

I'm designing a fader unit and I'm going to use an optical rotary encoder to access menu items (it's a fancy fader). However, I'm looking for an upgraded encoder knob "feel". I ran across one of @PRR's old posts (I don't think he's here anymore

Anyway, he talked about adding grease, thick grease, to give a more "premium" feel to an encoder rotation.

I am trying to figure out how to do this without actually opening the optical rotary encoder. I've thought of just adding a metal washer and putting the grease in between the bottom of the encoder knob and the top of the fader panel, but I'm pretty sure centrifugal force will push out the grease over time making a big mess.

Is there any simple or elegant way to do this right? I have tried to think of adding "channel" or grooves in the washer to keep the grease in, but this too seems doomed to failure...

See my lame pix attempts - the grease won't stay in there for sure.

Thanks everyone; I love this forum.

Mike

 

[Phrazemaster]

PS also, if there's some basic premade part I can use here, please share. I don't think a bearing would work...Or if there's a certain kind of grease that would work well. It would have to be fairly thick though...

Thanks again creative minds

 

[Rusan]

In place of a washer, how about a thin O-ring smeared with a dab of mineral oil or grease to lubricate it? Just a thought.

 

[JohnRoberts]

I would advise caution about putting grease inside an electrical control.

JR

 

[OneRoomStudio]

Another option is a felt washer. I’ve used them under knobs before to make a loose pot feel tighter.