Info required on old Calrec output transformers

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
G

Guest

Guest
Just picked up a couple of transformers...
They were salvaged from an early Calrec Quad desk that was sawn in half
Here is a picture of the logo from the desk
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=23785&item=7301013011&rd=1&ssPageName=WDVW
Here are the transformers
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3874619658&ssPageName=ADME:B:EOAB:UK:6
They are unshielded the make is Electrosonic
The specs are apparantly and I quote -
"10kohm/600 ohm (but I can't be sure of this) centre tapped."

Anybody got any pinouts? and are they any good?
What do I use them for...
They cost me a fiver for both.....
 

Latest posts

Back
Top